Type 3 Drain

Products

Perforated flexible single wall pipe, with corrugated interior and exterior walls for drainage application use

The Type 3 drain perforations has a 3 mm sluice.

Offered with a filtering sheath or not, according to the results of the granulometric analysis or the backfill material used.
Fits perfectly with our complete range of injected accessories, guaranteeing a high-performing and resistant assembly.
Product accredited WELL MADE HERE

Available with the following filtering sheaths:

Nonwoven polyester with 100-micron openings
Nonwoven polypropylene with 250-micron openings
Woven polyester with 450-micron openings

Meets the criteria of ASTM F667 and meets the requirements of OPSS 1840

Recommandation : Several factors enter into the selection of the product to be used. Therefore Soleno recommends a granulometric analysis before undertaking a drainage project in order to choose the right pipe according to the type of soil.

DISCOVER OUR FILTERING SHEATHS

Technical Documents

Our Recommendation

According to the results of the granulometric analysis or the backfill material used, Soleno will recommend (or not recommend) the use of filtering sheaths:

None: in the presence of a clay soil or a sandy clay soil or when clean stone is used as backfill around the drain.
100 microns: in the case of soil containing sandy or silty soil or when a draining sand is used as backfill around the drain.
250 microns: in the case of soil rich in fine and medium sand.
450 microns: in the case of a soil containing coarse sand to gravel.

Related Products and Accessories

REDUCE REUSE RECYCLE

Our range of drains, 100 mm to 250 mm (4 to 10 in) of diameter, was awarded EcoDesigned Product Attestation by the Council of sustainable industries (CSI).

This program created by the Council of sustainable industries (CID), Eco Entreprises Quebec (ÉEQ) and RECYC-QUEBEC aims at recognizing the eco-design approaches of an business in the development of packaging or products, as well as their environmental attributes.