HDPE accessory, blow molded in factory, primarily serving to collect water retained […]
HDPE accessory with external connection with clips, which offers dimensional accuracy. Shorter than […]
Factory-made HDPE resin injection molded drainage accessory installed inside the drain to […]
HDPE accessory to connect a pipe to a manhole with an output […]
HDPE accessory with internal connection with clips, which offers dimensional accuracy. This is […]
Drainage accessory with internal connection designed for connecting the Recyfix 100 mm […]
MarMac’s PolySeal exterior coupler is designed to connect corrugated HDPE pipes while […]
Galvanized and or aluminized steel coupling that allows the connection of several […]
HDPE accessory with external connection, offers dimensional accuracy. Allows the connection of […]
HDPE accessory, blow molded in factory, which enables to repair, on construction […]
HDPE accessory, blow molded in factory, the clamp coupling enables a watertight […]
Allows to identify the location of the drainage outlet when the vegetation […]
Locates drain lines on agricultural land. The flags are offered with a […]
HDPE accessory, injection molded in factory. Regular tap tee is used to […]
Roll made of curled aspen wood fibres, seed-free, mainly used for civil […]
HDPE accessory, blow molded in factory, that facilitates the installation of pipes […]
Steel Cross used to outline pipes with smooth exterior and interior walls […]
HDPE accessory, blow molded in factory, enabling the elongation of a pipe […]
HDPE accessory, blow molded in factory, which end’s cut at an angle, […]
Thermoplastic elastomers o-ring, used as a sealer at the pipes’ ends as […]
Thermoplastic elastomers o-ring, used as a sealer at the pipes’ ends of […]
Rubber accessory that enables to connect, during a service junction, a Solflo […]
HDPE accessory, that enables the connection of an HDPE pipe to a […]
HDPE accessory used to connect a HDPE pipe to a concrete manhole […]
HDPE accessory which enables to split a main line to a secondary […]
HPDE accessory which enables to split a main line to two same-diameter […]
HDPE accessory that enables to split a main line to a secondary […]
HDPE accessory which enables to split a main line to a secondary […]
HDPE accessory which enables the reduction of the outflow pipe diameter. It […]
HDPE accessory which enables the junction between four connections (two different diameters) […]
HDPE accessory which enables the junction between four connections of the Solflo […]
HPDE accessory which enables to convey the residence storm water to the […]
HDPE accessory, the 90 degree elbow enables a 90 degrees change of […]
HDPE accessory, the 90 degree HDPE Elbow enables to change the direction […]
HDPE accessory, the 45 degree elbow enables to change the directions of […]
HDPE accessory, the 22,5 degree elbow enables to change the direction of […]
HDPE accessory, with external connection, which adapts to our Solflo and Solflo […]
For gravity networks requiring perfect watertightness from ground water infiltration and conveyed […]
For networks requiring protection from coarse sediment infiltration, a bell with clips […]
A split coupler joins pipes by wrapping the junction with a moulded […]
Cast iron roadwork product for storm water collection available to complement the […]
Made of high-density polyethylene (HDPE), the Radon Sump Basin is a radon […]
HDPE accessory, blow molded in the factory, primarily serving to evacuate water […]
HDPE accessory, blow molded in the factory, primarily serving to evacuate water […]
HDPE Drainage accessory, the floor drain is designed for various drainage applications, […]
Polyethylene Grate, for storm water collection, available to complement the Corrugated Manhole/Catch […]
Aluminum Grate, installed on pipe exterior walls, used to prevent animals and […]
Stainless Steel Grate, installed in the drain, used to prevent animals and […]
Stainless Steel Fork Grate Used to prevent animals and debris from clogging […]
Drainage accessory, designed from injection molded resin in the factory, installed at the […]
Drainage accessory, designed from injection molded resin in the factory, installed in […]
Drainage accessory, designed from injection molded resin in the factory, installed at the […]
HDPE accessory, blow molded in the factory, to cover the Sump Well. […]
Drainage accessory, blow molded in the factory, which collects water from the […]
Mainly used in agricultural drainage to fix the joint of a maxi […]
The HDPE adaptor for PVC diameter enables to connect a 100 mm […]
HDPE accessory made by injection for greater accuracy, used to connect the […]
Drainage accessory, designed from injection molded resin factory, used for a 45 […]
HDPE drainage accessory, designed from injection molded resin factory, used for a […]
HDPE accessory with external connection with clips, which offers dimensional accuracy. This is […]
HDPE accessory with external connection with clips, which offers dimensional accuracy. This is […]
Drainage accessory with external connection, blow molded in the factory, which adapts to our […]
HDPE accessory with external connection with clips, which offers dimensional accuracy. This is […]
The 90-Degree Elbow fits all types of pipes due to a universal […]
Now fits all types of pipes due to a universal connection! Injected […]
HDPE accessory with internal connection with clips, which offers dimensional accuracy. This is […]
Drainage accessory with internal connection, designed from injection molded resin in factory, […]
Internal HDPE accessory with clips, which offers dimensional accuracy, the internal coupler allows […]
Drain support for flexible and rigid pipes Plastic alignment bracket for drain. […]
