Resource Center Design Tool Find an expert Find a point of sale
Resource Center Design Tool Find an expert Find a point of sale
Resource Center Design Tool Find an expert Find a point of sale

Narrow your search by category

Quick access

Resource Center

Find an expert

Our Solutions

Resource Center

Point of sale

Find a point of sale

Find an expert

Accessories - Solflo/Solflo Max

Reducer Tee

HDPE accessory that enables to split a main line to a secondary line at 90°, while increasing the flow cross section. It adapts to the Solflo and Solflo Max range.

Available models:

*Improved accessory: injected external reducing tee with clips, 150 x 150 x 100 mm (6 x 6 x 4 in) offers with new bell with universal interior connection!

This new accessory – 1T0064 – will gradually replace the 33T0604C.

 

 

Model shown: 33T1506

 

View the price list
Fill out a fabrication form
Reducer Tee

Technical Documents

Data Sheet

Diameters and Codes

  • 150 mm x 100 mm (6 in x 4 in) – 33T0604
  • 150 mm x 100 mm (6 in x 4 in) – 1T0064 improved  (replaces 33T0604C)
  • 200 mm x 100 mm (8 in x 4 in) – 33T0804
  • 200 mm x 150 mm (8 in x 6 in) – 33T0806
  • 250 mm x 100 mm (10 in x 4 in) – 33T1004
  • 250 mm x 150 mm (10 in x 6 in) – 33T1006
  • 250 mm x 200 mm (10 in x 8 in) – 33T1008
  • 300 mm x 100 mm (12 in x 4 in) – 33T1204
  • 300 mm x 150 mm (12 in x 6 in) – 33T1206
  • 300 mm x 200 mm (12 in x 8 in) – 33T1208
  • 375 mm x 150 mm (15 in x 6 in) – 33T1506
  • 375 mm x 200 mm (15 in x 8 in) – 33T1508
  • 375 mm x 250 mm (15 in x 10 in) – 33T1510
  • 375 mm x 300 mm (15 in x 12 in) – 33T1512
  • 450 mm x 150 mm (18 in x 6 in) – 33T1806
  • 450 mm x 200 mm (18 in x 8 in) – 33T1808
  • 450 mm x 250 mm (18 in x 10 in) – 33T1810
  • 450 mm x 300 mm (18 in x 12 in) – 33T1812
  • 450 mm x 375 mm (18 in x 15 in) – 33T1815
  • 600 mm x 300 mm (24 in x 12 in) – 33T2412
  • 600 mm x 375 mm (24 in x 15 in) – 33T2415
  • 600 mm x 450 mm (24 in x 18 in) – 33T2418
  •  750 mm x 600 mm (30 in x 24 in) – 33T3024
  • 900 mm x 600 mm (36 in x 24 in) – 33T3624
  • 900 mm x 750 mm (36 in x 30 in) – 33T3630
  • 1200 mm x 600 mm (48 in x 24 in) – 33T4824
  • 1200 mm x 750 mm (48 in x 30 in) – 33T4830
  • 1200 mm x 900 mm (48 in x 36 in) – 33T4836

Related Products and Accessories

Improved Accessorie!

New injected external reducing tee with clips, 150 x 150 x 100 mm (6 x 6 x 4 in)

  • Injected HDPE accessory with external connection with clips, which offers higher dimensional accuracy.
  • The new clips permanently lock the accessory on the drainage pipe.
  • The bell with universal interior connection, patent-pending, allows greater restraint, and a good flow section.
  • Provides a minimum stiffness of 340 kPa to meet the criterias of BNQ 3624-110, 3624-115 and 3624-120 standards, as well as CSA B182.8 and AASHTO M252.

 

Will gradually replace the soil tight (snap bell) reducer tee, 33T0604C.

 

*Improved model of 150 x 150 x 100 mm (6 x 6 x 4 in) – 1T0064 – only.

Now fits all types of pipes due to a universal connection!

Discover this new improved accessory

Questions?

Find an expert